Tesis profesional presentada por Israel Amador Riveros

Licenciatura en Ingeniería Mecánica. Departamento de Ingeniería Industrial y Mecánica. Escuela de Ingeniería y Ciencias, Universidad de las Américas Puebla.

Jurado Calificador

Presidente: Mtra. Paola Torres Madrid
Vocal y Director: Dr. Wieslaw Switek Wojcik
Secretario: Mtro. Luis Alberto Maus Bolaños

Cholula, Puebla, México a 15 de mayo de 2008.

Resumen

The document contains the compilation of information about the Fly Guy project having as a principal objective to take this information and build the first prototype explaining every detail of this work.

Through 10 chapters the construction and the most important information of the project is detailed.

First the report of the every member?s work is explained as a project part and the process during the time.

The assembly plan was designed by the analysis made and following the best way for the construction.

The chapter 5 shows the line followed by the construction explaining each part and also each problem found by the team.

The next step after the built prototype was to make the required test to be sure that every part and system was working as it was expected. The tests were selected studying the principal objectives of the prototype.

Finally the conclusions show the results of the work and the level of efficiency during the time.

Amador Riveros, I. 2008. Construction of the prototype “fly guy” based on the current designs verifying its functioning by tests during the project. Tesis Licenciatura. Ingeniería Mecánica. Departamento de Ingeniería Industrial y Mecánica, Escuela de Ingeniería y Ciencias, Universidad de las Américas Puebla. Mayo. Derechos Reservados © 2008.

Menú

Esta tesis sólo puede ser consultada por miembros de la Comunidad Universitaria.